-Pods-

Found 28 product(s) (1-28 of 28)

--GAUGES and PODS--  |  -Pods-
-A4 Complete Replacement Pod -A4 Complete Replacement Pod
Completely replaces upper steering column - not a layover for mk4
Price: $65.00

-A4 Single Column-Mount Gauge Pod -A4 Single Column-Mount Gauge Pod
Single gauge mounting overlay pod for the steering column on the A4-body Golf and Jetta
Price: $35.00

-A4 VW Dual Column Pod -A4 VW Dual Column Pod
A4 Volkswagen Dual Column Pod
Price: $40.00

B5 Passat ColumnPod with or without Indigo Boost Gauge B5 Passat ColumnPod with or without Indigo Boost Gauge


Passat ColumnPods

Easily keep an eye on your engine with a gauge mounted in a ColumnPod™.

The ColumnPod™ allows you to simply and quickly add a 2",2 1/16", or 52mm gauge to the steering column of your B5 (1998.5-2005) Passat.
Also available for the B6 Passat. See B6 Columnpod

Molded from ABS and matched in color and gloss, the ColumnPod™ looks like an OEM installation. It holds the gauge at an angle that minimizes distractions and helps keep your eyes on the road.

Click for closeup
   
Click for closeup Click for closeup

Add a "1" above to add Indigo 30 In.Hg - 30 PSI Boost Gauge,6 ft nylon tubing kit , NoBuzz T-connector, electrical wiring and connectors for an additional $70. To order just the gauge indicate a "1" next to "Just Gauge" option above for just the gauge and installation hardware ($70 total).
Price: $35.00

Boost/EGT 30 PSI and EGT 9' Complete Kit Boost/EGT 30 PSI and EGT 9' Complete Kit

Boost/EGT Combo gauge kit. This complete kit includes all cables and sensors. This laboratory quality instrument will measure your boost pressure with an external pressure sensor and exhaust gas temperature with a 2" type K thermocouple. The temperature range in the digital window goes from 0 to 1023 deg C. Includes wire harness, pressure sensor, thermocouple and compression fitting. Has 9 ft tc cable for right hand drive vehicles. MI1020-2

   
   
   
   
# Available
   
Price: $254.00

Indigo Offset DashPod for 2.0 FSI Complete Kit Indigo Offset DashPod for 2.0 FSI Complete Kit
Mk5 DashPod with color-matched Indigo gauges. Gauges come with appropriate connectors, senders, tubing, and fittings for 2.0FS, indigo 30 in. hg- 30 psi boost gauge w/nobuzz fitting, indigo 100 psi oil pressure gauge w/banjo port, indigo 2200degrees F EGT gauge.

Mk5 DashPods

Mounting in the center vent assembly on the dash, the Mk5 DashPod™ is designed to hold three (3) 2” or 2 1/16” (52mm) gauges.

Matched in color and gloss with the center vent assembly, the Mk5 ColumnPod™ looks like an OEM installation.

The unique, patent-pending design works with both Climatronic and non-Climatronic systems, snaps into place, is easily removable, and its low profile gives a clean, sleek look.

Download Mk5 Boost Gauge Installation Manual


Price: $442.00

McNally IAT Deg F EMP PSI combo gauge -39 Complete Kit McNally IAT Deg F EMP PSI combo gauge -39 Complete Kit
The McNally intake air temp and exhaust manifold pressure gauge is great for fine tuning high performance/ custom turbo and inter cooler upgrades.Order Includes Automotive 75 PSIG sensor used with all boost pressure gauges, pinned cable. IAT Deg F EMP PSI combo gauge -39. One 2" type K thermocouple and pinned cable, used with all gauges that read temperature. Thermocouple compression fitting that adapts into tapped hole in adapter plate or manifold. 1/8" NPT thread. Accepts .125" diasmeter thermocouples. MI1001-39, MI1005-1, MI1006-1, MI1008-1, MI1004-
Price: $312.00

McNally TDI Oil Press/Temp combo gauge 80 PSI Deg F -16 Complete Kit McNally TDI Oil Press/Temp combo gauge 80 PSI Deg F -16 Complete Kit
This gauge is great for showing Oil Pressure in PSI and Oil Temperature in degrees F. The kit includes the oil pressure and oil temp gauge, the external pressure sensor and cable, external thermocouple, and comp fitting. The TDI VW owners with the ALH engine can also add the Oil Press/Temp adapter manifold that holds the pressure and temperature sensors. MI1001-16, MI1008-1, MI1005-1, MI1004-3
Price: $242.00

Mk3 ColumnPod (Adjustable Steering Column or Non-Adjustable) Mk3 ColumnPod (Adjustable Steering Column or Non-Adjustable)
The VW Mk3 ColumnPod™ lets you put a 2" or 52mm gauge on the steering column of your 1993-1998 Golf or Jetta. Available for Ajustable Steering and Non-Adjustable Steering Column.

Gauge addition available
Price: $35.00

MK4 42 Draft Designs Lower Pod Beige Fabric MK4 42 Draft Designs Lower Pod Beige Fabric

mk4 Lower A-Pillar Gauge Pod Beige Fabric

Add the Upper Pod to this Lower Pod for the Dual Pod setup.

Price: $75.00

Mk4 42 Draft Designs Lower Pod Black Fabric Mk4 42 Draft Designs Lower Pod Black Fabric

mk4 Lower A-Pillar Gauge Pod Black Fabric

Add the Upper Pod to this Lower Pod for the Dual Pod setup.

Price: $75.00

Mk4 42 Draft Designs Lower Pod Gray Fabric Mk4 42 Draft Designs Lower Pod Gray Fabric

mk4 Lower A-Pillar Gauge Pod Gray Fabric

Add the Upper Pod to this Lower Pod for the Dual Pod setup.

Price: $75.00

Mk4 42 Draft Designs Upper Pod Beige Fabric Mk4 42 Draft Designs Upper Pod Beige Fabric
mk4 Upper A-Pillar Gauge Pod Beige Fabric
Price: $75.00

Mk4 42 Draft Designs Upper Pod Black Fabric Mk4 42 Draft Designs Upper Pod Black Fabric

mk4 Upper A-Pillar Gauge Pod Black Fabric

Add this Upper Pod to the Lower Pod for the Dual Pod setup.

Price: $75.00

Mk4 42 Draft Designs Upper Pod Gray Fabric Mk4 42 Draft Designs Upper Pod Gray Fabric

mk4 Upper A-Pillar Gauge Pod Gray Fabric

Add this Upper Pod to the Lower Pod for the Dual Pod setup.

Price: $75.00

Mk4 Golf Air Vent Pod Mk4 Golf Air Vent Pod

Mk4 Golf vent gauge pod for most Mk4 Golfs.

Note: Picture for left-hand drive (U.S) etc..
Price: $175.00

Mk5 Turbo VentPod? Mk5 Turbo VentPod?

Mk5 VentPods

Specifically designed for the driver’s side vent of the VW Mk5 chassis for GTI, Rabbit and Jetta, the NewSouth Performance VentPod is:

  • CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
  • Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
  • A simple snap-in fit that replaces the existing vent slats for easy installation
  • A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
  • Keeps the full function of the ventilation cut-off flap
  • VentPod matches the texture and color of the existing vent slats

Download Mk5 VentPod Installation Manual


Mk5 Turbo VentPod™
Mk5 VentPod™, Indigo 30 In.Hg - 30 PSI or VDO Vision Boost Gauge - 30 In.Hg - 25 PSI, 6 ft nylon tubing kit, NoBuzz T-connector, Blue or Red LED, electrical wiring and connectors

Price: $135.00

Mk5 VentPods Mk5 VentPods

Mk5 VentPods

Specifically designed for the driver’s side vent of the VW Mk5 chassis for GTI, Rabbit and Jetta, the NewSouth Performance VentPod is:

  • CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
  • Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
  • A simple snap-in fit that replaces the existing vent slats for easy installation
  • A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
  • Keeps the full function of the ventilation cut-off flap
  • VentPod matches the texture and color of the existing vent slats

Download Mk5 VentPod Installation Manual

 

Price: $55.00

MK6 Column Pod (Boost Gauge and TSI Fitting) MK6 Column Pod (Boost Gauge and TSI Fitting)


Mk6 Pods

With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.

The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.

Our exclusive ColumnPod design hides all wires and tubes from view.

Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:

  • CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
  • Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
  • A simple snap-in fit that replaces the existing vent slats for easy installation
  • A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
  • Keeps the full function of the ventilation cut-off flap
  • Matches the texture and color of the existing vent slats


 

 

Price: $125.00

MK6 Column Pod (no gauge) MK6 Column Pod (no gauge)


Mk6 Pods

With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.

The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.

Our exclusive ColumnPod design hides all wires and tubes from view.

Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:

  • CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
  • Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
  • A simple snap-in fit that replaces the existing vent slats for easy installation
  • A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
  • Keeps the full function of the ventilation cut-off flap
  • Matches the texture and color of the existing vent slats
  •  
Price: $35.00

MK6 Column Pod (with spectrum boost gauge and MultiTap hose) MK6 Column Pod (with spectrum boost gauge and MultiTap hose)


Mk6 Pods

With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.

The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.

Our exclusive ColumnPod design hides all wires and tubes from view.

Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:

  • CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
  • Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
  • A simple snap-in fit that replaces the existing vent slats for easy installation
  • A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
  • Keeps the full function of the ventilation cut-off flap
  • Matches the texture and color of the existing vent slats


 

 

Price: $165.00

MK6 Column Pod (with spectrum boost gauge ONLY) MK6 Column Pod (with spectrum boost gauge ONLY)


Mk6 Pods

With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.

The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.

Our exclusive ColumnPod design hides all wires and tubes from view.

Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:

  • CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
  • Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
  • A simple snap-in fit that replaces the existing vent slats for easy installation
  • A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
  • Keeps the full function of the ventilation cut-off flap
  • Matches the texture and color of the existing vent slats


 

 

Price: $115.00

MK6 Dual Column Pod ( with spectrum boost gauge ONLY) MK6 Dual Column Pod ( with spectrum boost gauge ONLY)


Mk6 Pods

With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.

The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.

Our exclusive ColumnPod design hides all wires and tubes from view.

Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:

  • CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
  • Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
  • A simple snap-in fit that replaces the existing vent slats for easy installation
  • A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
  • Keeps the full function of the ventilation cut-off flap
  • Matches the texture and color of the existing vent slats
  •  
Price: $120.00

MK6 Dual Column Pod (Boost Gauge and TSI Fitting) MK6 Dual Column Pod (Boost Gauge and TSI Fitting)


Mk6 Pods

With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.

The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.

Our exclusive ColumnPod design hides all wires and tubes from view.

Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:

  • CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
  • Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
  • A simple snap-in fit that replaces the existing vent slats for easy installation
  • A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
  • Keeps the full function of the ventilation cut-off flap
  • Matches the texture and color of the existing vent slats
  •  
Price: $130.00

MK6 Dual Column Pod (with spectrum boost gauge and MultiTap hose) MK6 Dual Column Pod (with spectrum boost gauge and MultiTap hose)


Mk6 Pods

With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.

The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.

Our exclusive ColumnPod design hides all wires and tubes from view.

Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:

  • CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
  • Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
  • A simple snap-in fit that replaces the existing vent slats for easy installation
  • A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
  • Keeps the full function of the ventilation cut-off flap
  • Matches the texture and color of the existing vent slats
  •  
Price: $170.00

MK6 Vent Pod (no gauge) MK6 Vent Pod (no gauge)


Mk6 Pods

With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.

The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.

Our exclusive ColumnPod design hides all wires and tubes from view.

Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:

  • CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
  • Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
  • A simple snap-in fit that replaces the existing vent slats for easy installation
  • A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
  • Keeps the full function of the ventilation cut-off flap
  • Matches the texture and color of the existing vent slats
  •  
Price: $55.00

MK6 Vent Pod (with spectrum boost gauge and MultiTap hose) MK6 Vent Pod (with spectrum boost gauge and MultiTap hose)


Mk6 Pods

With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.

The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.

Our exclusive ColumnPod design hides all wires and tubes from view.

Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:

  • CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
  • Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
  • A simple snap-in fit that replaces the existing vent slats for easy installation
  • A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
  • Keeps the full function of the ventilation cut-off flap
  • Matches the texture and color of the existing vent slats
  •  
Price: $185.00

MK6 Vent Pod (with spectrum boost gauge ONLY) MK6 Vent Pod (with spectrum boost gauge ONLY)


Mk6 Pods

With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.

The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.

Our exclusive ColumnPod design hides all wires and tubes from view.

Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:

  • CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
  • Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
  • A simple snap-in fit that replaces the existing vent slats for easy installation
  • A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
  • Keeps the full function of the ventilation cut-off flap
  • Matches the texture and color of the existing vent slats
  •  
Price: $135.00